Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Digital potentiometerDescription: 50KΩ），Analog Devices ### Digital Potentiometer - Analog Devices8361 -
![]()
Category: Digital potentiometerDescription: ANALOG DEVICES AD8402ARUZ50 Volatile digital potentiometer, 50 kohm, dual, SPI, linear, ± 20%, 2.7 V3946 -
![]()
Category: Digital potentiometerDescription: MICROCHIP MCP4651-104E/ST Volatile digital potentiometer, AEC-Q100, 100 kohm, dual, I2C, serial, linear, ± 20%, 1.8 V3641 -
![]()
Category: Digital potentiometerDescription: MCP444x/446x The Microchip MCP444x/446x series of digital potentiometers are digital potentiometers with non-volatile memory that can be programmed through an I2C interface. These digital POTs include Microchip WiperLock ™ Technology can lock the electric brush in place to protect the brush configuration from decay. MCP4441/MCP4461 devices can be configured as potentiometers, while MCP4442/MC4462 devices can be configured as variable resistors. ###Features: Four resistor network, two resistor network resolutions: MCP444x 7-bit 128 resistor (129 tap) and MCP446x 8-bit 256 resistor (257 tap), zero to full scale brush operation, low brush resistance: 75 Ω (typical), low temperature coefficient, non-volatile memory, I2C serial interface resistor network terminal disconnection function, reset input pin write protection function: power failure reset protection (1.5V typical), serial interface inactive current (2.5 uA typical), high voltage tolerance, digital input: up to 12.5V, supports separated rail applications, wide operating voltage: 2.7V to 5.5V, digital potentiometer - Microchip5055 -
![]()
Category: Digital potentiometerDescription: 2568-bit SPI 50kOhm non-volatile digital potentiometer surface mount - TSSOP-147414 -
![]()
Category: Digital potentiometerDescription: MCP45HVx1 The Microchip MCP45HVx1 series devices are digital potentiometers with SPI interface and onboard volatile memory. This device series has dual power rails, one analog and one digital. The analog power rail can handle up to+36 V voltage and can be used as a dual track (± 18 V) relative to digital logic ground. MCP45HVx1 has a write latch (WLAT) function, which can suppress volatile brush registers from updating (latch) through received data until the WLAT pin is low. This can update the condition specifications of the volatile brush register (such as zero crossing). ###Features: High voltage simulation support:+36 V terminal voltage range (DGND=V -), ± 18 V terminal voltage range (DGND=V -+18 V) Wide operating voltage: analog 10 V to 36 V, digital 2.7 V to 5.5 V or 1.8 V to 5.5 V (DGND ≤ V -+0.9 V) Single resistor network resistor network resolution: 7 bits: 127 resistors (128 taps) or 8 bits: 255 resistors (256 taps) - depending on the model High terminal/brush current (IW) support: 25 mA (for 5 k Ω), 12.5 mA (for 10 k Ω), and 6.5 mA (for 50 k Ω and 100 k Ω) Zero scale to full scale brush operation Low brush resistance: 75 Ω (typical) Low temperature coefficient: Absolute value (variable resistance) 50 ppm, proportional (potentiometer) 15 ppm (typical) SPI serial interface resistor network terminal through closed pin (SHDN) Or disconnect the connection terminal control (TCON) register and write the latch (WLAT) pin, used to control the update of volatile brush registers (such as zero crossing), power on reset/power off reset, used for digital and analog power serial interface inactive current (3 uA typical) 500 kHz typical bandwidth (-3 dB) operation (5.0 k Ω device) # # # Digital potentiometer - Microchip7463 -
![]()
Category: Digital potentiometerDescription: MAXIM INTEGRATED PRODUCTS MAX5479EUD+ Non volatile digital potentiometer, 100 kohm, dual, I2C, linear, ± 25%, 2.7 V1521 -
![]()
Category: Digital potentiometerDescription: Maxim Integrated Products ### Digital Potentiometer - Maxim8093 -
![]()
Category: Digital potentiometerDescription: MAXIM INTEGRATED PRODUCTS MAX5415EUD+ Volatile digital potentiometer, low drift, 100 kohm, dual, SPI, linear, ± 25%, 2.7 V7245 -
![]()
Category: Digital potentiometerDescription: ANALOG DEVICES AD5292BRUZ-20 非易失性数字电位器, 20 kohm, 单, 串行, SPI, 线性, ± 1%, 9 V9512 -
![]()
Category: Digital potentiometerDescription: 单数字控制电位器 Single Digitally Controlled Potentiometer6356 -
![]()
Category: Digital potentiometerDescription: Digital Potentiometer 256POS 50KΩ Dual 14Pin TSSOP7035 -
![]()
Category: Digital potentiometerDescription: MCP453x/455x/463x/465x 数字电位计 ### 数字电位计 - Microchip3163 -
![]()
Category: Digital potentiometerDescription: 双数控电位器（ XDCP ™ ） Dual Digitally Controlled Potentiometer (XDCP?)1360 -
![]()
Category: Digital potentiometerDescription: 双路， 256抽头，增/减接口，数字电位器 Dual, 256-Tap, Up/Down Interface, Digital Potentiometers1247 -
![]()
Category: Digital potentiometerDescription: 双路， 256抽头，增/减接口，数字电位器 Dual, 256-Tap, Up/Down Interface, Digital Potentiometers2393 -
![]()
Category: Digital potentiometerDescription: MAXIM INTEGRATED PRODUCTS MAX5487EUD+ 非易失性数字电位器, 10 kohm, 双, SPI, 线性, ± 25%, 2.7 V9183 -
![]()
Category: Digital potentiometerDescription: 7/8位单/双SPI数字电位器具有非易失性存储器 7/8-Bit Single/Dual SPI Digital POT with Non-Volatile Memory2180 -
![]()
Category: Digital potentiometerDescription: 7/8位四路SPI数字电位器具有易失性存储器 7/8-Bit Quad SPI Digital POT with Volatile Memory3190 -
![]()
Category: Digital potentiometerDescription: Digital Potentiometer 128POS 100KΩ Quad 14Pin TSSOP Tube7055 -
![]()
Category: Digital potentiometerDescription: MICROCHIP MCP45HV51-103E/ST 易失性数字电位器, 10 kohm, 单, I2C, 对数, ± 20%, 10 V9994 -
![]()
Category: Digital potentiometerDescription: MICROCHIP MCP4641-104E/ST 非易失性数字电位器, AEC-Q100, 100 kohm, 双, I2C, 串行, 线性, ± 20%, 2.7 V1665 -
![]()
Category: Digital potentiometerDescription: MICROCHIP MCP45HV31-103E/ST 易失性数字电位器, 10 kohm, 单, I2C, 对数, ± 20%, 10 V2667 -
![]()
Category: Digital potentiometerDescription: MCP454x/456x/464x/466x 数字电位计 ### 数字电位计 - Microchip9302 -
![]()
Category: Digital potentiometerDescription: MCP413x/415x/423x/425x 数字电位计 Microchip MCP413x、MCP415x、MCP423x 和 MCP425x 系列设备是具有 SPI 接口的数字电位计。 板载易失 RAM 存储器。 提供 7 位（129 步）和 8 位（257 步）型号，具有各种 RAB 电阻选项，从 5 kΩ 到 100 kΩ。 其他型号还提供可变电阻和电位计引脚输出可供选择，还提供单和双电阻器网络选项。 ### 特点 零刻度到满刻度电刷操作 低电刷电阻：75 Ω（典型） 低温度系数：绝对值（可变电阻）50 ppm，正比（电位计）15 ppm（典型） SPI 串行接口 电阻器网络端子断开连接功能 掉电重置保护：1.5 V（典型） 串行接口非活动电流：2.5 μA（典型） 高电压容差数字输入：高达 12.5V 支持分离式导轨应用 所有数字输入内部弱上拉模式 宽工作电压：1.8 V 至 5.5 V 宽带宽 (-3 dB) 操作：2 MHz，用于 5.0 kΩ 设备（典型） ### 型号 电位计电刷设置：MCP4131，MCP4151，MCP4231，MCP4251 可变电阻电刷设置：MCP4132，MCP4152，MCP4232，MCP4252 单电阻器网络：MCP4131，MCP4132，MCP4151，MCP4152 双电阻器网络：MCP4231，MCP4232，MCP4251，MCP4252 7 位，128 电阻器（129 步）：MCP4131，MCP4232，MCP4231，MCP4132 8 位，256 电阻器（257 步）：MCP4151，MCP4252，MCP4251，MCP4152 ### 数字电位计 - Microchip3613 -
![]()
Category: Digital potentiometerDescription: Single Digitally Controlled Potentiometer (XDCP ⑩)3527 -
![]()
Category: Digital potentiometerDescription: Dual Power/Low Power/1024 Click/SPI Bus Dual Supply/Low Power/1024 Tap/SPI Bus1279
